1 Pro Performance Polishing Compound -1 lb. jar
1 Quick Cut Polishing Compound -1 lb. jar
1 Glass Renew - 8 oz Bottle
1 Glass Glow - 8 oz Bottle
1 HTV Polishing Back Up Pad 6"
2 HTV Polishing Back Up Pad 4"
2 HTV Polishing Back Up Pad 2"
3 High Performance Polishing Disks 6"
4 High Performance Polishing Disks 4"
5 High Performance Polishing Disks 2"
2 Spray Bottles - 16 oz
2 Compound Applicators
1 Roll of Blocking Tape
1 Instruction Manual
The JANVIL GLASS REVIVE Scratch Removal System is designed to remove many types of surface damage such as rubs, staining, chemical spatters, graffiti and vandalism damage and severe scratches (up to .004 of an inch deep) from almost all types of glass. It can tackle the jobs that other scratch removal systems can not.
| Industry Test Prove It Works! |
The Janvil Glass Revive Scratch Removal System has been Industry tested and found to be the ONLY AFFORDABLE system on the market proven to offerDistortion Free results.
Scratches, water scale, acid etching, paint overspray and many other imperfections can all be removed from glass in homes, businesses and automobiles. Using Janvil can save you a fortune by avoiding the skyrocketing cost of glass replacement.
| Can be Used on most Types of Glass |
The Janvil Glass Revive system is perfect for use on laminated, curved, tempered, insulated, plate and flat glass. The Glass Revive system should be used if you are working on Tempered or Low E glass.
Our approach to scratch removal has always been a bit different from the other guys. Instead of requiring you purchase overpriced items and equipment that you do not need; Janvil offers products that work at a price that makes sense. Our system can be used to remove nearly all types of surface damage and scratches ranging from light to more severe.
Since there are so many types and price ranges of polishing equipment available on the market, we have decided to leave the choice of equipment up to you. All you need for the Glass Revive system is a polisher motor with a 5/8"–11 male thread spindle connection (industry standard) or a drill with a 3/8" chuck. (Either equipment option must run at a speed range of 2000 to 3500 rpm.)
The system is complete with everything else that you will need to work with the equipment that you choose to use.
